                             DELRINA CORPORATION

        895 Don Mills Road                6830 Via Del Oro
         500-2 Park Centre                    Suite 200
         Toronto, Ontario               San Jose, California
          Canada M3C 1W3                  U.S.A. 95119-1353

NORTH AMERICAN SUPPORT
Bulletin Board (BBS): (416) 441-2752     WinComm:            (416) 443-4395
Fax InfoLine:         (416) 443-1614     Forms Products:     (416) 441-3086
Fax:                  (416) 441-0774     Macintosh Products: (416) 441-2457
DosFax/WinFax/LITE:   (416) 441-0921     Network Products:   (416) 441-1928
WinFax PRO 4.0:       (416) 443-4390     Consumer Software:  (416) 441-4628

U.K. SUPPORT
General Support:   44(0)181-207-7033     Fax:             44(0)181-207-7034

===========================================================================
                   T E C H N I C A L    N O T E S
                         Product: WinFax PRO 4.0
                    Document No.: 6046
                   Document Date: October 6, 1994
===========================================================================
Subject: Error Message: "Cannot Locate Cover Page Template"

Situation:
==========
When using the "setcoverpage" DDEPoke command, the error "cannot locate 
cover page template" appears.

The "cannot locate cover page template" error message appears if either or 
both of the following conditions exist:

Cause 1:
========
The cover page file (.cvp) referenced in the "setcoverpage" command does not
appear in any of the cover page libraries.
 
Solution 1:
===========
Add the cover page to one of your WinFax cover page libraries so you may use
the cover page with DDE.

Cause 2:
========
The "showsendscreen" has been set to "0" (off). 

Solution 2:
===========
This statement is not necessary since the command "showsendscreen" defaults 
to off.  If you are using ".cvp" cover pages in your statement, 
"showsendscreen" must be set to "1" (on).

Note:  If you have "showsendscreen" set to "1" (on), the coverpage fill text 
specified by "fillcoverpage" is ignored on the assumption that you are 
showing the send screen to allow for the entry of cover page text.

For further details on DDE, refer to Technical Note #6007, "General 
Information on the Delrina WinFax API". Also, you may refer to the Delrina 
WinFax PRO 4.0 User's Guide, "Using WinFax DDE Macro Commands" in Chapter 11. 

Alternative:
============
The DDE "setcoverpage" issues outlined above have been resolved in the 
WinFax PRO 4.0 maintenance release dated July 28, 1994. To check the release 
date on your copy of WinFax PRO, select Help, About from the WinFax menu.  
If the release date is earlier than July 28, 1994, order an upgrade to the 
latest version.

To order the WinFax PRO 4.0 maintenance release:

- From a touch tone phone, call the Delrina Fax InfoLine (416) 443-1614 to 
  obtain a Shipping Information form (document number 1000). Fill out this 
  form and fax it back to us at (416) 441-0774; or

- Call the Delrina Technical Support Department at (416) 443-4390.

Technical Note #6041 outlines changes to, and additional Windows Dynamic 
Data Exchange (DDE) Functions available in the WinFax PRO 4.0 July 28, 
1994 maintenance release. 
