                             DELRINA CORPORATION

        895 Don Mills Road                6830 Via Del Oro
         500-2 Park Centre                    Suite 200
         Toronto, Ontario               San Jose, California
          Canada M3C 1W3                  U.S.A. 95119-1353

NORTH AMERICAN SUPPORT
Bulletin Board (BBS): (416) 441-2752     WinComm:            (416) 443-4395
Fax InfoLine:         (416) 443-1614     Forms Products:     (416) 441-3086
Fax:                  (416) 441-0774     Macintosh Products: (416) 441-2457
DosFax/WinFax/LITE:   (416) 441-0921     Network Products:   (416) 441-1928
WinFax PRO 4.0:       (416) 443-4390     Consumer Software:  (416) 441-4628

U.K. SUPPORT
General Support:   44(0)181-207-7033     Fax:             44(0)181-207-7034

===========================================================================
                   T E C H N I C A L    N O T E S
                         Product: WinFax PRO 4.0
                    Document No.: 6039
                   Document Date: October 6, 1994
===========================================================================
Subject: Modifying the Fax Broadcast Initialization String


Situation:
==========
After modifying the Fax Broadcast initialization string to use the Delrina
Fax Broadcast Service, WinFax reverts the string back to the default 
fax/modem setting.

Solution:
=========
Once you have modified the initialization string to use the Fax Broadcast 
service, do not access the Fax/Modem Setup dialog until you need to make a 
change to the setting. If you inadvertently select Fax/Modem Setup, click 
Cancel to exit without changing the initialization string. Selecting Cancel 
in the Fax/Modem Setup dialog ensures that the Fax Broadcast initialization 
string does not revert back to the default fax/modem setting.

If OK is selected in the Fax/Modem Setup, the Fax Broadcast initialization 
string will revert back to the default fax/modem setting.

To restore the modified Fax Broadcast initialization string, select Services,
Fax Broadcast Setup, from the WinFax menu.  If the initialization string has 
changed, modify the string by re-entering the initialization information.
