GoCIS Version 1.01 
1992, 1993 Copyright(C)
All Rights Reserved
Logix Systems
16038 Augusta Drive
Chino Hills, Ca 91709

	
Installing GoCIS

	What you Should Know to Use GoCIS

	Before installing and using GoCIS, you should have a basic
	knowledge of your computer and the Windows environment.  In
	particular, you should be familiar with the use of menus,
	windows, and dialogue boxes and other controls typically used
	in the Windows environment.

	You should be able to select items by highlighting them with
	the arrow keys, or clicking on them with the mouse.  You must
	also have an understanding of the operation of your modem.

	For more information about the Windows operating system, refer
	to your Microsoft Windows User Guide.  For more information about
	your modem, refer to the manual that came with your modem.


System Requirements

	GoCIS requires the following minimum hardware and software
	environment to run acceptably:

	An IBM PC, PS/2 or 100% compatible computer.

	A 386/20 CPU chip, (386-33 recommended).

	At least one floppy disk drive of 1.2MB 5.25" or a 720K 3.5"
	floppy and a hard disk.

	At least 4 megabytes or more of RAM.  The more RAM you have the
	better GoCIS will run.

	Approximately  2 megabytes of free space on your hard disk
	drive in order to install the complete GoCIS product.  If you
	already have some of the required DLL's the space will be
	correspondingly less.

	Microsoft Windows 3.0 or 3.1 running enhanced mode installed on
	your system.

	An Asynchronous modem from 1200 - 14400 Baud.

	GoCIS may run on configurations that do not meet these minimum
	requirements; however, the performance may not be acceptable.


Downloading from CompuServe

	The following is a list of the files necessary for downloading
	from CompuServe:
 
	The naming convention used is GCnnnX where:

		GC  ....... indicates GoCIS
		nnn ....... indicates version
		X   ....... Sequence

	For example:

	GC101A.ZIP .... Contains the installation notes 
			for GoCIS Version 1.01


	The files on CompuServe are as follows:

	NOTE: For those of you UPGRADING from PRIOR releases
	you should only require GCnnnC and GCnnnD:

	GCnnnA.ZIP .... Installation Notes (this file)
			and README.WRI Getting Started Manual

	GCnnnB.ZIP .... Support Files      1 of 4 (REQUIRED)
	GCnnnC.ZIP .... Main Program       2 of 4 (REQUIRED)
	GCnnnD.ZIP .... VBX Files          3 of 4 (REQUIRED)
	GCnnnE.ZIP .... Help & User Docs   4 of 4 (OPTIONAL)

	VBRUN3.ZIP .... VBRUN300.DLL This is the visual basic runtine
			library.  (REQUIRED)

			This file is REQUIRED  and can be found in
			several forums:

				MSBASIC............. VB Files  VBRUN3.ZIP
				WinUSER.............. (GoCIS)  VBRUN3.ZIP

			However Check your

				\WINDOWS
			or      \WINDOWS\SYSTEM

			directories and see if this file (VBRUN300.DLL)
			is present on your system.  If so, there
			is no need to download this file.

			This file is NOT INSTALLED by the installation
			procedure.  Simply unpack this file into your
			\WINDOWS\SYSTEM directory if you need it.


	If you download GoCIS from CompuServe, copy the files
	onto a 1.2 or 1.4 diskette and save them for future reference
	prior to running the installation.


FOR FIRST TIME INSTALLATIONS...

To INSTALL GoCIS create a directory called GoCIS and 
unzip the WCnnnB...F files using the -d option of pkunzip

	For example:

	  C:>MD \GoCIS
	  C:>CD \GoCIS

	+ + + + IMPORTANT + + + +

	IT IS VERY IMPORTANT that you use the -d switch in order
	for PKUNZIP to create and unpack the files into the 
	appropriate subdirectories...

	  C:\GoCIS>PKUNZIP -d A:GCnnn*.ZIP


	After you have installed the files you will find a Windows 
	GoCIS.GRP file that you can add to PROGMAN in the \GoCIS 
	directory.  To do so go to Windows progman and select 
	FILE/NEW..  

	For the description enter...     GoCIS
	For the group file enter....     C:\GoCIS\GoCIS.GRP

	If you have placed GoCIS on a differnt drive or directory 
	than C:\GoCIS you will have to modify the GoCIS program 
	group items by holding down the alt-key and double-clicking 
	on the program items.  Then correct the command line and or 
	working directory as appropriate.

For a quick tour of GoCIS please refer to 

	GETTING STARTED in README.WRI

For a quick reference to more of the commonly asked questions
please refer to:

	Questions and Answers in Q&A.WRI

For a summary of the latest changes review please refer to:

	CHANGE HISTORY in HISTORY.WRI


Thank you for taking the time to give GoCIS a try. If you have comments 
and/or suggestions please feel free to post them in section 12 (GoCIS) of 
the WinUser forum on CompuServe.

GoCIS is a shareware product (formally known as WinCIS).  You can order
a registered version of GoCIS by contacting:

Patri-soft Software
5225 Canyon Crest Dr.
Suite 71-358
Riverside CA, 92507

To Order Call:  909-352-2820
	or Fax: 909-352-1527
	CIS Id: 76670,1471



Larry Lee

