The purpose of this Microsoft Access based program is:
    Point of Sale Inventory Control  PSIC :
	For: Small to Medium size retail store(s) that are like a "Bicycle"store
	         that has 2 to 10 thousand Products in stock, collects Customer's 
	         names and information, sells products that have serial numbers,
	         accounts for "Orders" by employee.  The current system is designed
	         for up to three (3) locations. If you want to add more, then add more" \WAnn" Directories,
	        ( where nn is a number e.g. WA00 for work site with work areas 01 through 09)
	        Those directories are the place to store the Tables (PSICtbls.mdb) that are 
	         added to, or changed, at each store's site.  At the "Close out" time the file is 
	        renamed PSICWAnn.mdb, compacted, and put in to the \SENDFILE directory.
	        You then transfer that file  to the MASTER site's PSIC\WAnn directory use a 
	         modem (via. RAS) or some other means. 

Two ways to get setup
1) Use the Batch file that you will see in the directory that you found this file in.
	You should see the following files
	README.TXT	this file!
	NOTE: Copy YOUR PKUNZIP.EXE to the directory the Install.bat file is in
	Because, Install.bat does not know where to find your copy of PKUNZIP.EXE
	or edit the Install.bat flie to locate the  PKUNZIP.EXE for the commands in the batch file.
	Install.BAT	in  Windows file manager, double click it (after doing the above) 
	PSIC.zip		will expand to give you all files to setup PSIC see below 
	All of the above may be deleted after you  "setup" using the SETUP.EXE  in 
	DISK1 directory

2) Make a new directory \PSIC
	Move the PSIC.ZIP file there
	TO UNZIP the PSIC.zip  USE THE COMMAND:
	PKUNZIP -d PSIC.ZIP
	the -d restores the directory structure  e.g.  DISK1 DISK2   etc.

Please Print the file AGREEMENT.DOC   Sign and return to the Address provided.

After Unzipping, you may copy the CONTENTS of the directories; DISK1 DISK2 etc.  to 3 1/2 High density
(1.44 MB) floppies. Do NOT copy the Directory name e.g. DISK1
Those disks can be used to install or  re-install the PSIC  program, using the normal WIndows a:\setup scheme
starting with DISK1 in drive A:

To SETUP the PSIC  program from the Hard Disk Drive,  run SETUP.EXE located in Directory \PSIC\ DISK1
After the Setup has completed, and you have copied the directories, you may REMOVE the five (5) Directories;
DISK1 DISK2 DISK3 DISK4 DISK5 